Vol. 15 No. 3 (2026)

Published: 2026-08-18

Editorials

Journal contacts

Dirk Röske

1-2
- PDF
Introductory notes for the Acta IMEKO third issue in 2026

Francesco Lamonaca

1-4
- PDF
Introduction to the Acta IMEKO Thematic Issue ‘Infrared thermography: challenges and new frontiers’

Antonio Cannuli, Roberto Montanini

1-2
- PDF
Introduction to the Acta IMEKO Thematic Issue '2025 IMEKO TC26 International Conference on Metrology for Archaeology and Cultural Heritage'

Fabio Leccese

1-3
- PDF
Introduction to the Acta IMEKO Thematic Issue 'IMEKO TC15 Collegium 2026' – Part 1

Daniel Kytýř, Emina Hadzalic, Zvonimir Tomičević

1-2
- PDF

Research Papers

Detection of induction motor faults by envelopes of higher current harmonics

Alexander Shestakov, Dmitry Galyshev, Victoria Eremeeva, Vladimir Sinitsin, Olga Ibryaeva

1-8
- PDF
Enhancing accelerometer calibration results by reporting interpolated calibration data

Ian Veldman, Anderson Maina, Henrik Volkers

1-7
- PDF
Assessment of innovation management systems in established innovative companies: A conceptual model based on ISO 56002:2019 standard a conceptual model based on ISO 56002:2019 standard

Felippe Vicencio Gomes , Maria Fatima Ludovico de Almeida

1-9
- PDF
Self-assessment model for pharmaceutical companies based on Good Manufacturing Practices for pharmaceuticals in Brazil: a multicriteria approach a multicriteria approach

Alexandre Nunes, Maria Fatima Ludovico de Almeida, Daniel Lousada

1-10
- PDF
Multicriteria conceptual framework for maturity assessment of testing and calibration laboratories based on the ISO/IEC 17025: 2017 standard

David Correa , Maria Fatima Ludovico de Almeida

1-9
- PDF
Theoretical analysis of the impact of normalizing composite quality indicator components on their extrema

Anatolyi Dolzhanskiy, Oksana Bondarenko, Oleh Brahynskyi

1-7
- PDF
Development of an IoT-based network for urban environmental monitoring in a vulnerable area of Los Ríos, Santo Domingo, Dominican Republic

Jesús D´Alessandro, Melisa Vargas, Alfredo Sguglio, Pierpaolo Filippelli, Angelo Maciletti, David Feliz

1-13
- PDF
Circularly polarized vision system for attenuation of reflection and glare

Luigi Montalto, Daniele Rinaldi, Paolo Castellini, Nicola Paone

1-6
- PDF
Loss of accuracy compensation in determining a vessel's location with a mixed distribution of position line measurement errors

Igor Burmaka, Bogdan Alieksieichuk, Olha Burenko, Iryna Zhuravska

1-9
- PDF
Comparative assessment of ISO/IEC Guide 98-3 and Monte Carlo methods for temperature sensor calibration: A simulation-based study

Akmaljon Mamatov, Qaxramon Ergashov, Mukhlisa Rustamova, Odinakhon S. Rayimdjanova, Bekmurod Yusupov, Jasurbek Abdumannobovich Matkarimov, Gafurjon Khamrakulov, Mahzuna Turdialiyeva

1-9
- PDF
Three-dimensional inertial measurement unit-based analysis of wheelchair racing propulsion using a Sensor-in-Glove System

Kimitomo Taniguchi, Tatsuru Ibusuki, Koichi Kawabata

1-16
- PDF
Dust detector for museum environment based on Raspberry Pi: A first improvement

Mariagrazia Leccisi, Giuseppe Schirripa Spagnolo, Fabio Leccese

1-7
- PDF
Time measurement and uncertainty in Galileo’s inclined plane: From water clocks to electronic timing

Giorgia Satta, Giuseppe Schirripa Spagnolo, Federico Fina, Ilaria De Angelis, Fabio Leccese

1-9
- PDF
Comparative evaluation of CNN and ViT architectures for the petrographic classification of Levantine ceramic micrographs

Sara Capriotti, Donatella Genovese, Alessio Devoto, Kamal Badreshany, Dennis Braekmans, Silvano Mignardi, Simone Scardapane, Laura Medeghini

1-7
- PDF
Evaluation of Radon exhalation rate, natural radioactivity content, and radiological hazard for untreated and aged Viterbo tuff stone

Francesco Caridi, Daniele Chiriu, Stefania Da Pelo, Giuliana Faggio, Michele Guida, Giacomo Messina, Maurizio Ponte, Silvestro Antonio Ruffolo, Domenico Majolino, Valentina Venuti

1-7
- PDF
In-situ molecular investigation of ancient and restoration mortars from the theatre of Tindari (Sicily, Italy) by DRIFTS and µ-Raman spectroscopy

Giuseppe Paladini, Francesco Caridi, Domenico Majolino, Gabriele Lando, Paola Cardiano, Valentina Venuti

1-7
- PDF
From bell sound to architectural function: Quantitative vibroacoustic metrology applied to the Norman bell tower of Salerno Cathedral (Italy)

Fabrizio Barone, Rosa Fiorillo, Marco Casazza

1-12
- PDF
Dynamic Finite Element Modelling (DFEM) procedure for cultural heritage: Displacement-based reconstruction of the dynamical behaviour of the Roman bridge over the Savuto River

Fabrizio Barone, Armando Di Maio, Salvatore Antonio Fornaro, Marco Casazza

1-19
- PDF
Infrared thermography as a measurement tool for non-invasive stress assessment in canaries

Antonio Cannuli, Antonino Costa, Salvatore De Caro, Francesco Fazio, Vincenzo Parrino, Antonino Quattrocchi, Roberto Montanini

1-7
- PDF
From surface to subsurface: Integrating imaging techniques and laser profilometry in artworks study

Giulia Iorio, Chiara Merucci, Valerio Graziani, Andrea Fabbri, Paolo Branchini, Luca Tortora

1-9
- PDF
Evaluating the effects of gamma irradiation on early 20th-century paper for paper-based cultural heritage preservation using non-destructive and minimally destructive techniques

Rocco Carcione, Beatrice D'Orsi, Elena Palmieri, Jessica Scifo, Ilaria Di Sarcina, Luca Maiolo, Francesco Maita, Alessia Cemmi

1-8
- PDF
Less is more: Few-shot learning in 3D super resolution using synthetic CT images

Lukas Nepelius, Patrick Weinberger, Caroline Hastra, Miroslav Yosifov, Jonathan Glinz, Sascha Senck

1-8
- PDF
X-ray computed tomography for non-destructive evaluation of steel wire ropes: Comparison of laboratory XCT configurations for image quality and damage visualization

Daniel Kytyr, Petr Koudelka, Jan Sleichrt, Jaromir Kylar, Radka Hrazdirova, Jiri Lahodny

1-7
- PDF
Performance analysis of an asynchronous time integration scheme for split Hopkinson pressure bar simulations

Radim Dvořák, Lukáš Kocian, Petr Koudelka

1-8
- PDF
Spiral X-ray computed tomography of long wooden samples: Influence of pitch and geometric calibration on reconstruction quality

Vaclav Rada, Daniel Vavřík, Jiři Kunecký, Daniel Kytýř

1-6
- PDF
Monitoring of crack propagation in anisotropic rocks during compressive strength testing using gas permeability measurements

Martin Vavro, Leona Vavro, Lukáš Kubina, Karel Sosna

1-7
- PDF
Dynamic and quasi-static characterization and Cowper–Symonds material model calibration of photopolymer resins produced by stereolithography

Tomáš Doktor, Veronika Drechslerová, Jan Falta, Tomáš Fíla, Václav Rada, Bohumil Hora, Daniel Kytýř, Petr Koudelka

1-7
- PDF

Vol. 15 No. 3 (2026)

Editorials

Journal contacts

Introductory notes for the Acta IMEKO third issue in 2026

Introduction to the Acta IMEKO Thematic Issue ‘Infrared thermography: challenges and new frontiers’

Introduction to the Acta IMEKO Thematic Issue '2025 IMEKO TC26 International Conference on Metrology for Archaeology and Cultural Heritage'

Introduction to the Acta IMEKO Thematic Issue 'IMEKO TC15 Collegium 2026' – Part 1

Research Papers

Detection of induction motor faults by envelopes of higher current harmonics

Enhancing accelerometer calibration results by reporting interpolated calibration data

Assessment of innovation management systems in established innovative companies: A conceptual model based on ISO 56002:2019 standard a conceptual model based on ISO 56002:2019 standard

Self-assessment model for pharmaceutical companies based on Good Manufacturing Practices for pharmaceuticals in Brazil: a multicriteria approach a multicriteria approach

Multicriteria conceptual framework for maturity assessment of testing and calibration laboratories based on the ISO/IEC 17025: 2017 standard

Theoretical analysis of the impact of normalizing composite quality indicator components on their extrema

Development of an IoT-based network for urban environmental monitoring in a vulnerable area of Los Ríos, Santo Domingo, Dominican Republic

Circularly polarized vision system for attenuation of reflection and glare

Loss of accuracy compensation in determining a vessel's location with a mixed distribution of position line measurement errors

Comparative assessment of ISO/IEC Guide 98-3 and Monte Carlo methods for temperature sensor calibration: A simulation-based study

Three-dimensional inertial measurement unit-based analysis of wheelchair racing propulsion using a Sensor-in-Glove System

Dust detector for museum environment based on Raspberry Pi: A first improvement

Time measurement and uncertainty in Galileo’s inclined plane: From water clocks to electronic timing

Comparative evaluation of CNN and ViT architectures for the petrographic classification of Levantine ceramic micrographs

Evaluation of Radon exhalation rate, natural radioactivity content, and radiological hazard for untreated and aged Viterbo tuff stone

In-situ molecular investigation of ancient and restoration mortars from the theatre of Tindari (Sicily, Italy) by DRIFTS and µ-Raman spectroscopy

From bell sound to architectural function: Quantitative vibroacoustic metrology applied to the Norman bell tower of Salerno Cathedral (Italy)

Dynamic Finite Element Modelling (DFEM) procedure for cultural heritage: Displacement-based reconstruction of the dynamical behaviour of the Roman bridge over the Savuto River

Infrared thermography as a measurement tool for non-invasive stress assessment in canaries

From surface to subsurface: Integrating imaging techniques and laser profilometry in artworks study

Evaluating the effects of gamma irradiation on early 20th-century paper for paper-based cultural heritage preservation using non-destructive and minimally destructive techniques

Less is more: Few-shot learning in 3D super resolution using synthetic CT images

X-ray computed tomography for non-destructive evaluation of steel wire ropes: Comparison of laboratory XCT configurations for image quality and damage visualization

Performance analysis of an asynchronous time integration scheme for split Hopkinson pressure bar simulations

Spiral X-ray computed tomography of long wooden samples: Influence of pitch and geometric calibration on reconstruction quality

Monitoring of crack propagation in anisotropic rocks during compressive strength testing using gas permeability measurements

Dynamic and quasi-static characterization and Cowper–Symonds material model calibration of photopolymer resins produced by stereolithography

Current Issue

Information