Validation of numerical methods for electromagnetic dosimetry through near-field measurements

Authors

  • Domenico Giordano INRIM
  • Luca Zilberti INRIM
  • Michele Borsero INRIM
  • Roberto Forastiere Dip. Energia, Politecnico di Torino
  • Wencui Wang INRIM

DOI:

https://doi.org/10.21014/acta_imeko.v4i1.169

Abstract

This paper describes the arrangement of a first experimental set-up which allows the comparison between the measurement of the electromagnetic field quantities induced inside a simple cylindrical phantom and the same quantities estimated numerically through a boundary element method. The reliability of the numerical method has been tested at 64 MHz, the Larmor frequency associated to the magnetic resonance imaging devices with an isocenter magnetic field of 1.5 T. To assess its robustness, the comparison is also performed by introducing, inside the phantom, a metallic non magnetic element, which roughly simulates a medical implant.

Downloads

Additional Files

Published

2015-02-05

Issue

Vol. 4 No. 1 (2015)

Section

Research Papers

License

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.

Users are free to

  • share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
  • adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.

At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.

Authors are

  • able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).