3D shape measurement techniques for human body reconstruction

Authors

  • Iva Xhimitiku Centro di Ateneo di Studi e Attività Spaziali "Giuseppe Colombo" (CISAS), University of Padova
  • Giulia Pascoletti Department of Mechanical and Aerospace Engineering (DIMEAS), Politecnico di Torino
  • Elisabetta M. Zanetti Department of Engineering, University of Perugia http://orcid.org/0000-0003-4121-6126
  • Gianluca Rossi Department of Engineering, University of Perugia

DOI:

https://doi.org/10.21014/acta_imeko.v11i2.1219

Abstract

In this work the performances of three different techniques for 3D scanning have been investigated. In particular two commercial tools (smartphone camera and iPad Pro LiDAR) and a structured light scanner (Go!SCAN 50) have been used for the analysis. First of all, two different subjects have been scanned with the three different techniques and the obtained 3D model were analysed in order to evaluate the respective reconstruction accuracy. A case study involving a child was then considered, with the main aim of providing useful information on performances of scanning techniques for clinical applications, where boundary conditions are often challenging (i.e., non-collaborative patient). Finally, a full procedure for the 3D reconstruction of a human shape is proposed, in order to setup a helpful workflow for clinical applications.

Author Biography

Iva Xhimitiku, Centro di Ateneo di Studi e Attività Spaziali "Giuseppe Colombo" (CISAS), University of Padova

Centro di Ateneo di Studi e Attività Spaziali  ''Giuseppe Colombo'' (CISAS), University of Padua, Italy.

Downloads

Published

2022-05-04

Issue

Vol. 11 No. 2 (2022)

Section

Research Papers

License

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).