Design and development of high load Brinell hardness standard machine at UME

Authors

  • C. Kuzu UME Kocaeli
  • E. Pelit UME Kocaeli

DOI:

https://doi.org/10.21014/acta_imeko.v9i5.974

Abstract

After successful implementation of two hardness standardizing machines at TSE (Turkish Standards Institution) in Rockwell and Brinell-Vickers hardness scales separately and deciding to combine them in one machine with a newer design and install it in Hardness Laboratory of UME (National Metrology Institute of Republic of Turkey) it was planned to design and develop a deadweight type Brinell Hardness standard machine at UME for high load scales within the scope of an internally funded project. In this paper the design of High Load Brinell Hardness Standard Machine with dead weight force application system realized by UME Hardness Laboratory is explained.

Downloads

Published

2020-12-31

Issue

Vol. 9 No. 5 (2020): Special issue for TC3, TC5, TC16 and TC22

Section

Conference Submissions

License

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.

Users are free to

  • share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
  • adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.

At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.

Authors are

  • able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).