Practical investigation for the concept of a serial-type build-up force measurement system

Authors

  • M. Abdulhakim National Institute of Standards (NIS) Giza
  • Saher R. Hassan Physikalisch-Technische Bundesanstalt (PTB) Braunschweig
  • F. Tegtmeier Physikalisch-Technische Bundesanstalt (PTB) Braunschweig

DOI:

https://doi.org/10.21014/acta_imeko.v9i5.957

Abstract

This paper introduces a proposed design for the first Serial-type Build-Up System (S-BUS). The work includes the design and implementation of two S-BUS prototypes, the metrological characteristics of the prototypes were evaluated. The evaluation results prove the validity of the system practically. The paper also discusses the key differences between the Parallel Build-Up System (P-BUS) and the S-BUS, and what makes it important to study the S-BUS concept.

Downloads

Published

2020-12-31

Issue

Vol. 9 No. 5 (2020): Special issue for TC3, TC5, TC16 and TC22

Section

Conference Submissions

License

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.

Users are free to

  • share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
  • adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.

At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.

Authors are

  • able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).