Comparison of fracture energy of concrete under static and cyclic loading
DOI:
https://doi.org/10.21014/actaimeko.v15i4.2505Keywords:
fracture energy, concrete, damage, cyclic loadAbstract
Fracture energy is the primary input for any cohesive analysis of concrete, yet it is almost always measured under monotonic static loading, while real structures are loaded repeatedly. This paper compares the fracture energy obtained from static three-point bending of notched concrete beams with the value derived from the envelope of low-cycle tests on nominally identical specimens of the same mix. Beams with relative notch depths a/W = 0.3 were tested on a servo-hydraulic machine, with the crack mouth opening displacement (CMOD) measured by a clip extensometer. The static work of fracture reached 258 J/m² up to a common CMOD of 0.42 mm, against 249 J/m² for the two low-cycle specimens, a difference of 3.4 %. The damage obtained from the unloading stiffness exceeded 0.9 by a CMOD of approximately 0.2 mm, while the irreversible CMOD grew linearly with CMOD at a slope of 0.88 to 0.92.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Petr Miarka, Kamila Kozakova, Lucie Malíková, Vlastimil Bílek

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.
Users are free to
- share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
- adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.
At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.
Authors are
- able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).