Tensile and shear performance of polyurethane foam joints in masonry after short-term natural environmental exposure

Authors

  • Erik Kovaček University of Rijeka, Faculty of Civil Engineering, Radmile Matejčić 3, 51000 Rijeka, Croatia
  • Emina Hadžalić University of Rijeka, Faculty of Civil Engineering, Radmile Matejčić 3, 51000 Rijeka, Croatia
  • Nina Čeh University of Rijeka, Faculty of Civil Engineering

DOI:

https://doi.org/10.21014/actaimeko.v15i4.2498

Keywords:

masonry, PU foam joints, tensile performance, shear performance, short-term environmental exposure

Abstract

This study investigates the mechanical behaviour of polyurethane (PU) foam joints in masonry, with a focus on tensile and shear performance following short-term natural environmental exposure. Test specimens were prepared using precision-ground clay masonry blocks bonded with a one-component PU adhesive, forming thin-layer joints. Two groups were considered: a reference series maintained under controlled laboratory conditions and an exposed series subjected to unsheltered natural outdoor conditions for 33 days. All tests were conducted under quasi-static, displacement-controlled conditions. Compared with the reference specimens, the exposed series showed lower mean peak loads, with reductions of approximately 31 % in tension and 29 in shear. Owing to the limited number of specimens and the short exposure period, these results are interpreted as preliminary evidence of environmental sensitivity rather than as an assessment of long-term durability. The study provides experimental data for the further characterisation and modelling of thin PU adhesive joints in masonry systems.

Downloads

Published

2026-11-19

Issue

Section

Research Papers