Finite element modeling of a nominal tetrachiral lattice under quasi-static compression with preliminary insights into manufacturing-induced geometric deviations
DOI:
https://doi.org/10.21014/actaimeko.v15i4.2475Keywords:
tetrachiral lattice, quasi-static compression, finite element model, nominal geometry, aas-manufactured geometryAbstract
This study presents the finite element modeling of an SLA-manufactured tetrachiral lattice subjected to quasi-static uniaxial compression. The constitutive law of the base material was calibrated using cyclic compression tests performed on bulk specimens, providing the elastic modulus, yield stress, and true-stress--plastic-strain relationship. A three-dimensional finite element model of the nominal lattice geometry was developed in Abaqus and solved using the explicit solution scheme. The numerical predictions showed good agreement with the experimental force–displacement response during the initial stage of compression. However, the numerical model progressively overestimated the load-carrying capacity as the deformation increased. Preliminary comparison of the nominal CAD geometry with X-ray computed tomography (XCT) data revealed manufacturing-induced geometric deviations, that may contribute to the discrepancies between the numerical and experimental responses. These findings highlight the need for a finite element framework that incorporates as-manufactured geometries and representative boundary conditions derived from full-field measurements obtained using Digital Volume Correlation (DVC).
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Vito Topić Brečević, Emina Hadzalic, Veronika Drechslerová, Petr Koudelka, Daniel Kytýř, Zvonimir Tomičević

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.
Users are free to
- share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
- adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.
At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.
Authors are
- able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).