Introduction to the Acta IMEKO Special Issue on the 2025 IMEKO TC8, TC11 and TC24 Joint Conference

Authors

  • Leonardo Iannucci Politecnico di Torino - Dipartimento di Scienza Applicata e Tecnologia http://orcid.org/0000-0002-1996-1958
  • Marija Cundeva-Blajer Ss. Cyril and Methodius University in Skopje, Faculty of Electrical Engineering and Information Technologies, st. “Rugjer Boshkovikj“ No.18, Skopje, Republic of North Macedonia
  • Thomas Wiedenhöfer Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, 38116 Braunschweig, Germany

DOI:

https://doi.org/10.21014/actaimeko.v15i2.2451

Author Biography

Leonardo Iannucci, Politecnico di Torino - Dipartimento di Scienza Applicata e Tecnologia

Leonardo Iannucci received a PhD in Metrology in 2019 from Politecnico di Torino (Italy). From 2019 to 2021, he was a research fellow at Politecnico di Torino. From November 2020 to July 2021, he was a visiting researcher at EPFL (Neuchâtel, Switzerland) in the Integrated Circuit Laboratory (ICLAB).

Currently, he is a Tenured Assistant Professor (RTT Researcher) with the Department of Applied Science and Technology at Politecnico di Torino. His main research fields are metals corrosion in industry and cultural heritage applications, development of innovative coatings for corrosion protection and electrochemical measurements.

He is member of IMEKO (International Measurement Confederation), IEEE (Institute of Electrical and Electronics Engineers), AIM (Associazione Italiana di Metallurgia) and GMEE (Gruppo Misure Elettriche ed Elettroniche). From 2017 to 2019 he was Chair of the Politecnico di Torino IEEE Student Branch. Since November 2021 he has the office of Scientific Secretary in the IMEKO TC24 on Chemical Measurements; since October 2024 he is Associate Editor of 'Measurement' Journal.

Downloads

Published

2026-06-30

Issue

Vol. 15 No. 2 (2026)

Section

Editorials

License

Copyright (c) 2026 Leonardo Iannucci

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.

Users are free to

  • share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
  • adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.

At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.

Authors are

  • able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).