Metrological evaluation of speed of sound in oils for commercial phantom development

Authors

DOI:

https://doi.org/10.21014/actaimeko.v14i3.2006

Keywords:

metrological assessment, oil-based phantoms, tissue-mimicking materials, ultrasonic properties, ultrasound diagnostic equipment

Abstract

This study presents a metrological evaluation of speed of sound in oil-based materials, aiming to support the development of Tissue Mimicking Materials (TMM) for the performance assessment of diagnostic ultrasonic equipment. While traditional agar-based TMMs are commonly used, their limited durability and stability highlight the need for alternative materials with improved transportability and long-term consistency. In this context, mineral oil, lubricating oil, and ethylene glycol were characterized for their ultrasonic properties. Measurements were carried out using a pulse-echo ultrasonic setup with submerged transducers, under controlled temperature conditions. The speed of sound was determined based on time-of-flight data, and the associated measurement uncertainties were evaluated following the Guide to the Expression of Uncertainty in Measurement (GUM). The measured ultrasonic velocities for each material were as follows: ethylene glycol at (1727.0 ± 4.6) m s-1, mineral oil at (1397.0 ± 5.7) m s-1, and lubricating oil at (1472.0 ± 4.7) m s-1. Among the tested materials, mineral and lubricating oils demonstrated the most suitable acoustic behaviour and are therefore strong candidates for use in the development of stable and transportable oil-based phantoms.

Author Biography

Rodrigo Pereira Barretto da Costa-Félix, Instituto Nacional de Metrologia, Qualidade e Tecnologia

Diretoria de Metrologia Científica e Industrial, Divisão de Acústica e Vibrações (Diavi)

Laboratório de Ultrassonografia (Labus)

Downloads

Published

2025-09-10

Issue

Vol. 14 No. 3 (2025)

Section

Research Papers

License

Copyright (c) 2025 Mylena Kathleen Mosqueira de Assis, Rodrigo Pereira Barretto da Costa-Félix

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.

Users are free to

  • share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
  • adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.

At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.

Authors are

  • able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).