Development and metrological characterisation of the new LNE 500 N · m deadweight torque standard machine

Authors

  • C. Duflon LNE Paris
  • P. Averlant LNE Paris

DOI:

https://doi.org/10.21014/acta_imeko.v9i5.962

Abstract

This paper describes the development and metrological characterisation of the new LNE 500 N · m deadweight torque standard machine. This machine is integrated into the LNE 5 kN · m deadweight torque standard machine. New masses and a mass change platform have been developed and added to the 5 kN · m machine. After this, LNE realised the metrological characterisation of the 500 N · m machine. The determination of the uncertainties of this torque standard machine and the comparison measurements with the LNE 50 N · m deadweight torque standard machine and with CEM, the National Metrology Institute of Spain, are described in this paper. The results show that the estimated uncertainties are satisfactory because they are a factor of about four times smaller than those of the old standard machines.

Downloads

Published

2020-12-31